Mallinckrodt NPB-190 Manual del operador descargar pdf (Pagina 24)

Setup

MONITOR SETUP

General

WARNING: To ensure patient safety, do not place the

monitor in any position that might cause it to fall on the

patient.

WARNING: As with all medical equipment, carefully route

patient cabling to reduce the possibility of patient

entanglement or strangulation.

WARNING: Disconnect the NPB-290 and Nellcor sensor

from the patient during magnetic resonance imaging (MRI)

scanning. Induced current could potentially cause burns.

The NPB-290 may affect the MRI image; the MRI unit may

affect the accuracy of oximetry measurements.

WARNING: To ensure accurate performance and prevent

device failure, do not subject the NPB-290 to extreme

moisture, such as direct exposure to rain. Such exposure may

cause inaccurate performance or device failure.

WARNING: Do not use an NPB-290 monitor, sensor, cables,

or connectors that appear to be damaged.

WARNING: The NPB-290 is not defibrillator-proof.

However, it may remain attached to the patient during

defibrillation or while an electrosurgical unit is in use, but the

readings may be inaccurate during use and shortly thereafter.

Setting Up The NPB-290

The NPB-290 operates on AC power when the hospital-grade

power cord is connected to both the monitor and an AC power

source (wall outlet).

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 78 79

Sin comentarios

Mallinckrodt NPB-190 Manual del operador Pagina 24