Mallinckrodt NPB-190 Manual del operador descargar pdf (Pagina 21)

Quick Guide to Operation

3. When a valid pulse is detected, the NPB-290 begins

monitoring.

ADJUST PULSE BEEP VOLUME

The pulse beep volume can be adjusted by pressing either the

Adjust Up or Adjust Down buttons located on the right side of

the front panel.

ALARM FUNCTIONS

View/Adjust Alarm Limits

To view the current upper alarm limit for SpO2, press the upper

alarm limit button once. The upper alarm limit is shown in the

%SpO

2 Display. To change the limit, press either the Adjust Up

or Adjust Down button until the desired limit is shown in the

display.

To view the current upper alarm limit for Pulse Rate, press the

upper alarm limit button twice. To change the limit, press the

Adjust Up or Adjust Down button until the desired limit is

shown.

The same view/adjust functions may be performed for lower

alarm limits by pressing the lower alarm limit button and

following the same procedure as described above.

Audible Alarm Silence

WARNING: Do not silence the audible alarm or decrease its

volume if patient safety could be compromised.

To silence the audible alarm, press the Audible Alarm Silence

button. The indicator lights to show that the alarm has been

temporarily silenced.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 78 79

Sin comentarios

Mallinckrodt NPB-190 Manual del operador Pagina 21