Mallinckrodt NPB-190 Manual del operador descargar pdf (Pagina 80)

Troubleshooting and Maintenance

The N-395 requires no routine service or calibration other than

changing the battery at least every 24 months.

If service is necessary, contact qualified service personnel or

your local Mallinckrodt representative.

Periodic Safety Checks

It is recommended that the following checks be performed every

24 months.

• Inspect the equipment for mechanical and functional

damage.

• Inspect the safety relevant labels for legibility.

Performance Verification

If the monitor has been visibly damaged or subjected to

mechanical shock (for example, if dropped), qualified service

personnel should perform the procedure in the Performance

Verification section of the service manual.

Cleaning

WARNING: Do not spray, pour, or spill any liquid on the

N-395, its accessories, connectors, switches, or openings in the

chassis.

For surface-cleaning and disinfecting follow your institution’s

procedures or:

§ The N-395 may be surface-cleaned by using a soft cloth

dampened with either a commercial, nonabrasive cleaner or a

solution of 70% alcohol in water, and lightly wiping the

surfaces of the monitor.

§ The N-395 may be disinfected using a soft cloth saturated

with 10% chlorine bleach in tap water solution.

Before attempting to clean an SpO

2 sensor, read the directions for

use enclosed with the sensor. Each sensor model has cleaning

instructions specific to that sensor.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 109 110

Sin comentarios

Mallinckrodt NPB-190 Manual del operador Pagina 80