Mallinckrodt NPB-190 Manual del operador descargar pdf (Pagina 18)

Setup

Optional Accessories

A wall mount plate, as described in the Sensors and Accessories

section is available from Mallinckrodt for use with this monitor.

MONITOR SETUP

General Warnings

WARNING: To ensure patient safety, do not place the

monitor in any position that might cause it to fall on the

patient.

WARNING: As with all medical equipment, carefully route

patient cabling to reduce the possibility of patient

entanglement or strangulation.

WARNING: Disconnect the NPB-295 and Nellcor sensor

from the patient during magnetic resonance imaging (MRI)

scanning. Induced current could potentially cause burns.

The NPB-295 may affect the MRI image; the MRI unit may

affect the accuracy of oximetry measurements.

WARNING: To ensure accurate performance and prevent

device failure, do not subject the NPB-295 to extreme

moisture, such as direct exposure to rain. Such exposure may

cause inaccurate performance or device failure.

WARNING: Do not use an NPB-295 monitor, sensor, cable,

or connector that appears to be damaged.

WARNING: The NPB-295 is not defibrillator-proof.

However, it may remain attached to the patient during

defibrillation or while an electrosurgical unit is in use, but the

readings may be inaccurate during use and shortly thereafter.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 86 87

Sin comentarios

Mallinckrodt NPB-190 Manual del operador Pagina 18