Mallinckrodt NPB-190 Manual del operador descargar pdf (Pagina 14)

Controls, Indicators, and Symbols

The Pulse Amplitude Indicator (blip bar). Indicates

pulse beat and shows the relative pulse amplitude.

As the detected pulse becomes stronger, more bars

light with each pulse. This indicator is available

only in the magnified (blip) view.

The digital Pulse Rate Display. Shows the pulse

rate in beats per minute. It flashes during

loss-of-pulse alarms and when the pulse rate is

outside of the alarm limits. During Pulse Search,

the display will alternate between dashed lines and

the last pulse rate measurement.

The AC Power

Indicator. Lights continuously when

the NPB-295 is connected to AC power. It also

indicates that the battery is charging. It is off when

the monitor is being powered by its internal battery.

The Low Battery Indicator. Lights continuously to

indicate that 15 or fewer minutes of battery capacity

remains.

The Alarm Silence Indicator. Lights continuously

when an audible alarm has been silenced. It flashes

when the alarm silence duration has been set to OFF

and the Alarm Silence Button is pressed.

The Motion Indicator. Lights continuously when the

monitor detects motion sufficient enough to affect

readings.

The Pulse Search Indicator. Lights continuously

prior to initial acquisition of a pulse signal, and

during Pulse Search. It flashes during a loss-of-

pulse signal.

BPM

DESCRIPTION OF AUDIBLE INDICATORS

Following are descriptions of NPB-295 audible indicators.

Power-On Self-Test Pass A 1-second tone indicating that the

NPB-295 has been turned on and

successfully completed the power-

on self-test

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 86 87

Sin comentarios

Mallinckrodt NPB-190 Manual del operador Pagina 14